|
7810E STANDARD EQUIPMENT
- 100HK Drive Chains
- Accoustical Material, Floor Mat and Headliner
- Adjustable Operator Restraint Bar with Armrests
- Auxiliary Hydraulics
- Anti-Vandalism Tailgate
- All-Tach Attachment System: Single-Lever (manual)
- Battery Charge Indicator Light
- Battery Disconnect Switch
- Belly Plate for Clean Out
- Bi-directional Adjustable-Flow Auxiliary Hydraulics with Flat-Faced Couplers
- Choice of Controls: Joystick, T-bar, Hand/Foot and Dual-Hand
- Dual-Element Air Cleaner with Visual Indicator
- Dual Front and Rear Halogen Work Lights and Rear Tail Lights
- Engine Coolant Temperature Gauge and Indicator Light
- Engine Auto-Shutdown System
- Foot Throttle (except Hand/Foot)
- Fuel Level Gauge
- Glow Plug Starting Assist
- Horn
- Hourmeter
- Hydraloc System - Brakes and Interlock for Starter, Lift/Tilt Cylinders and wheel drives
- Hydraulic Lift ROPS/FOPS
- Hydraulic Oil Filter Indicator Light
- Independent Steel Hydraulic Reservoir
- Interior Dome Light
- Oil Pressure Indicator Light
- Powerview® Vertical Path Lift Arm
- Rear Engine Cover and Door Opens for Easy Access
- Remote Battery Jump Terminals
- ROPS/FOPS ISO Level II
- Seatbelt Indicator Light and Buzzer
- Self-Leveling Lift Action
- Servo-Controlled Hydrostatic Drive
OPTIONAL EQUIPMENT
- 2-speed Transmission
- 3-inch Wide Seatbelt - When Required
- Adjustable Suspension Seat
- Audible Back-up Alarm
- All-Tach™ Attachment System: Power
- Bi-directional High-Flow Auxiliary Hydraulics with Flat-Faced Couplers
- Bucket Bolt-in Cutting Edge Kits
- Centrifugal Pre-Cleaner
- Electric ROPS/FOPS Lift
- Engine Block Heater
- Four-Point Lift Kit
- Front Door with Wiper
- High-Flow Hydraulics
- Hydraglide Ride Control System
- Hydraulic Couplers Kit
- Impact-Resistant Front Door
- Operator's Compartment Heater/Defroster/Air Conditioner
- Rear-View Mirror
- Single-point Lift Kit
- Sliding Side Windows
- Strobe Light
| Dirt/Construction Buckets |
Weight |
SL7810E
Rating |
| 84" / 22 cu ft |
835 lbs |
4000 lbs |
| 84" / 22 cu ft |
905 lbs |
4100 lbs |
| 90" / 29.3 cu ft |
966 lbs |
3950 lbs |
| Pallet Forks |
Weight |
SL7810E
Rating |
| 15.75" Forks with Backrest Rating per EN474-3 |
492 lbs |
3491 lbs |
| 19.68" Forks with Backrest Rating per EN474-3 |
492 lbs |
3211 lbs |
| 24" Forks with Backrest Rating per SAE 1197 |
492 lbs |
3014 lbs |
| 7810E SPECIFICATIONS |
DIMENSIONS |
| Overall Operating Height |
187.8" |
| Height to Hinge Pin (fully raised) |
142" |
| Overall Height (to top of ROPS) |
81.0" |
| Ground Clearance to Chassis |
9.1" |
| Overall Length (w/ 84" bucket) |
161.0" |
| Overall Length (w/o bucket) |
122.0" |
| Wheelbase |
55.0" |
| Dump Reach (full height) |
38.2" |
| Rollback at Ground |
28.5° |
| Dump Angle |
38° |
| Overall Width |
81.0" |
| Bucket Width |
84" |
| Clearance Circle (rear) |
80.5" |
| Clearance Circle (front, w/o bucket) |
60.6" |
| Clearance Circle (front, w/bucket) |
101.7" |
| Seat to Ground Height |
41.0" |
| Rollback at Full Height |
85° |
| Dump Height |
107.0" |
| Departure Angle |
21° |
| Standard Tire Size |
14.00x17.5 HD |
ENGINE |
| Make |
Cummins |
| Model |
B4.5T-99C |
| Net Power @ rpm |
99 hp @ 2200 |
| Displacement |
275 cu.in. |
| Torque |
305 ft.-lbs. @ 1500 |
HYDRAULIC SYSTEM |
| Auxiliary Hydraulics - Standard |
29 gpm |
| High-Flow Hydraulics - Optional |
41 gpm |
| Filtration |
3 micron |
| Reservoir Capacity |
15 gal. |
CAPACITIES AND WEIGHTS |
| Rated Operating Load |
3850 lbs. |
| Fuel Tank |
30.5 gal. |
| Travel Speed - max. |
7.5 mph |
| Travel Speed with 2-speed - max. |
12.5 mph |
| Operating Weight - approx. |
10,520 lbs. |
|
FEATURES
Choice of Controls: Dual-Hand Controls
Choice of Controls: Hand/Foot Controls 
Choice of Controls: T-Bar "Hands-Only" Controls
Choice of Controls: Joystick Controls 
True vertical-lift linkage provides consistent forward reach throughout the entire 11'10" lift cycle
Large operator's compartment with clear side and rear sight lines for increased safety
New swing-open rear door, swing-up engine cover and swing-out cooling package provide quick, complete access to engine
All-Tach® attachment mounting system for compatibility with most attachments |
