H&S Manufacturing Farm Wagons
The H&S Farm Wagons have maximum flexibility, straight trailing, rugged dependability and wide track stability. All are ASAE stress tested.
Spring Assist
Stake Pocket Wear Plates
Rear Hitch
The rear hitch is standard on all models except 406.
4 bolt brake flanges are standard equipment on 412, 415, 416, 417 & 420 models. The brake flanges allow installation of optional hydraulic surge brakes.
Brake flanges shown are not available on 406, 408 & 410 models.
L-Shaped Front Spindles
L-shaped front spindles with structural bracing to withstand high stresses from shock loads. (models 406, 408, 410, 412 & 415)
Thrust bearings on models 415, 416, 417 & 420 ensure dependable, smooth turning and straight trailing.
The thrust bearing shown is not available on the 406, 408, 410 & 412 models.
T-style Spindles
Models 416, 417 & 420 utilize a t-style spindle assembly and use truck type steering because of the increased torque loads that result from the use of wide floatation or truck tires.
T-style spindles are not available on 406, 408, 410, 412 & 415 models.
Tele-Pole
The Tele-pole is made of structural tubing and the mounting plates have side spacing between them to reduce the sway and increase the strength of the pole.
Turn Stops
C-Section Reach Features
Rocking Bolster
The rocking bolster is standard on the 416 model.
The rocking bolster is not available on 406, 408, 410, 412, 412, 415, 417 & 420 models.
Support Braces - All Wear Protected
* 416 model comes with rocking bolster