Don Allison Equipment, Inc.

Your source for quality equipment and service
Call Us! 800-669-6450 • Email: sales@donallisonequipment.com

H&S Manufacturing HDX-Series Hay Rakes

H&S HDX-Series Hay Rakes
The H&S HDX Series hay rakes features a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of crop.
Call for Pricing and Finance Options

Turnbuckle Adjustment

H&S Manufacturing HDX-Series Hay Rakes
Two turnbuckle adjustments (B) on the support rods of each rake beam adjust to keep the rake beam level.

Rake Wheel Ground Pressure

H&S Manufacturing HDX-Series Hay Rakes
Each rake beam has an adjustment (A) for the rake wheel ground pressure allowing the operator to fine tune for various conditions.

Proven Ground Pressure System

H&S Manufacturing HDX-Series Hay Rakes
Like all H&S rakes, the HDX series rakes have a proven ground pressure system and rake arm design. All models of the HDX series rakes also feature one side raking with either side.

Width and Height Adjustment

H&S Manufacturing HDX-Series Hay Rakes
The variable main frame width adjustment opens symmetrically. Hitch height and beam fore and aft tilt are easily controlled by a ratchet jack (C).

Tandem Tires and Beam Angle Kit

H&S Manufacturing HDX-Series Hay Rakes
Tandem 6.70 x 15 tires with rims (D) are standard equipment.

Toggle Switch

H&S Manufacturing HDX-Series Hay Rakes
Toggle switch up adjusts left beam angle.
Toggle switch neutral adjusts main frame width.
Toggle switch down adjusts right beam angle.

Rake Wheel Wind Boards

H&S Manufacturing HDX-Series Hay Rakes
Optional rake wheel wind boards help to keep the crop from wrapping on the rake wheels.

Optional Light Kit

H&S Manufacturing HDX-Series Hay Rakes

HDX-Rake Configurations

H&S Manufacturing HDX-Series Hay Rakes
HDX-2 - 2 wheel front extension
HDX-3 - right extension
HDX-14 - 14 wheel V-style rake
HDX-16 - 16 wheel V-style rake
HDX-17 - 17 wheel Y-style rake
HDX-19 - 19 wheel Y-style rake
H&S HDX-Series Hay Rake Specifications
ModelHDX-X14HDX-X16HDX-X17HDX-X19
# of Rake Wheels
14
16
17
19
Wheel Diameter
60"
60"
60"
60"
Teeth per Wheel
40
40
40
40
Tooth Diameter
7 mm
7 mm
7 mm
7 mm
Transport Width
12' 5"
12' 5"
12' 5"
12' 5"
Transport Length
26' 5"
29' 4"
34' 8"
37' 7"
Windrow Width Adjustment
up to 94"
Raking Width
up to 31'
up to 34' 6"
up to 31'
up to 34' 6"
Rake Wheel Hubs
Tapered Roller Bearings
Hitch Jack
Standard
Standard Transport Wheels
4-Tandem 6.70 x 15
Rake Wheel Wind Guards
Optional
Transport/Work Lights
Optional
Hydraulic Requirements
1 double acting remote for main frame open and close
1 single acting remote for rake wheel lift
Electrical Requirements
Plus 12 volt power source for hydraulic beam angle kit
Weight
4140#
4400#
4540#
4800#


HDX-X16