Don Allison Equipment is a Farm & Agriculture Equipment Dealer in Arley, Alabama

Nationwide
Delivery is
Available!

Business Hours: (cst)
Mon-Thurs  8am-5pm
Friday 8am-4pm
Saturday 8am-12pm

Search
Call (800) 669-6450 for prices & more information
HayBuster Balebuster 2650
(Round Bales)

The secret is still the shredder chamber.
The 2650's shredded chamber is one of the easiest to operate. Just load a bale into the shredder chamber and go! Rarely do you have to reverse bale rotation to process a flat bottom or loose bale.
Call for Pricing and
Finance Options


14mb

Exclusive Features available ONLY on the 2650 Balebuster

  • Heavy-Duty Flails and High Speed Rotor: The 2650 features an oil bath chain case to reverse the direction of the PTO, increasing the speed and efficiency of the rotor by 20%!
  • Patented shredder chamber with adjustable slug bars and 3 chain slat conveyor. Combining these features with the heavy duty flails and high speed rotor, the 2650 shredder chamber will process bales in any condition...wet, frozen, old, new, or with flat bottoms. The conveyor is slanted so it helps feed the haystraw into the rotor. The adjustable slugbar allows the operator to adjust the length of the cut, even with a bale in the chamber.
  • Right side discharge. Tractor hydraulic controls are located on the right side, the 2650's right hand discharge makes it easy to look over your right shoulder and keep your hand on the controls.
  • Two stage bale loader: The 2650 speeds up the loading process by allowing each bale to be lifted separately without disturbing other bales. The bale loader also carries a second bale, to increase productivity.

The RIGHT OPTIONS on your 2650 can make all the difference!

  • Stripper Channels: Hay too long? The cut length can be shortened by adding up to two additional stripper channels.
  • 2650GT 21-Bushel Grain Tank: The Haybuster Grain Tank applies grain on top of the windrow at the same time that you are processing. The grain tank top dresses corn, cereal grains, and pelletized feed supplements. You can easily maintain your "Feed Ratio per Animal" with the grain tank's adjustable metering system.
  • Hydraulic Deflector Controls - Wide Deflector Belt: The hydraulic deflector saves you steps by moving the rack and the deflector from transport position to working position without leaving the comfort of your tractor cab. The wide deflector belt discourages leaves and fines from being blown past the fence-line bunk into the feedlot. Highly recommended when bunk feeding.
  • Electronic Scale: Manage your feeding program better with a Digi-Star EZ 2000 scale system from Haybuster. The EZ 2000 has the best features and the best functions.
  • Fenders, Road Lights, Highway or Floatation Tires: Choose the tire size that fits your needs: 12.5L x 15 8 ply implement tires, 31 x 10.5 x 15 load range C highway tires, or 14L x 16.1 8 ply floatation tires.
  • Axle Extension Kit: Extends the 2650's axles 12 inches on each side for stability in uneven and steep terrain.
Features
Patented Shredder Chamber with Adjustable Slug Bars and 3 Chain Slat Conveyor
Combining these features with the heavy duty flails and high speed rotor, the 2650 shredder chamber will process bales in any condition...wet, frozen, old, new, or with flattened bottoms. The conveyor is slanted so it helps feed the hay/straw into the rotor. The adjustable slug bar allows the operator to adjust the length of the cut, even with a bale in the chamber.
Tow Stage Bale Loader
The 2650 speeds up the loading process by allowing each bale to be listed separately without disturbing the other bales. The bale loader also carries a second bale, to increase productivity.
Easily Adjustable Slug Bars
The Slug Bars on the 2650 are easily adjustable from a single point. The slug bar adjustment alters the amount of the rotor exposed to the hay, and is adjusted based on the type of hay, moisture content of the hay and the coarseness/fineness of the cut desired.
Rotor Access Door
The 2650 incorporates a rotor access door, giving you quick and easy access to the rotor for routine inspections and twine removal. Two additional stripper bars can be installed on the door to reduce the length of cut.
Oil Bath Chain Case - Increases Rotor Speed
The unit is powered through the in line PTO and oil bath chain case. The chain drive increases the RPM of the rotor by 20%.

Balebuster 2650 Specifications
Total Weight 4,500 lbs
Tongue Weight (Bale loader fully raised) 1,300 lbs
TRANSPORT DIMENSIONS (Bale Loader Fully Raised, Deflector Folded)
Width 8' 5"
Length 14' 3"
Height 11' 1"
WORKING DIMENSIONS with 1 Bale, Deflector in Spread Position
Width 11'
Length 14' 3"
Height 11' 1"
WORKING DIMENSIONS with 2 Bales, Deflector in Spread Position
Width 11'
Length 19' 7"
Height 11' 1"
CHASSIS FEATURES
Towing Arrangement Clevis type hitch
Jack Capacity 5,000 lbs
Jack Travel 10"
Tires 2) 12.5L x 15 - 8ply
Wheels 2) 10 x 15 - 6 bolt, drop center
Bearing Type Tapered Roller
BALE LOADER
Type Integral 2 Stage, Twin Boom Arms
Bale Tines Tubular Steel, 10° float, 4 position width
Adjustable Hydraulic Cylinder 4-1/2" x 24", Double Acting
BALE CONVEYOR
Type - 3 Roller Chains with Bolt-on Cross Slats
Drive - Hydraulic Orbital Motor with Adjustable Flow Control
BALE SHREDDER CHAMBER
Maximum Bale Size 6' long x 6-1/2' diameter
Maximum Bale Weight 2,200 lbs
Rotor Length 78"
Rotor Diameter (Flails extended) 25"
Rotor Bearing Ball, 1-3/4"
Number of Flails 30
Flail Type Heavy Duty 7/16" thick
Swinging / Heat Treated Spring Steel
Number of Stripper Channels 1
Number of Slug Bars 5
Slug Bars Single Point Adjustment with 5 settings, 180° range
Delivery Right Hand Discharge
Deflector 6 Adjustment Settings through a 120° range
Max. Horizontal Spread Straw, up to 50'
OPERATOR CONTROLS
Loader - 1 Tractor Double-Acting
Hydraulic Valve
Bale Conveyor - 1 Tractor Double-Acting Hydraulic Valve
Bale Coveyor Speed - Conveyor Speed Control Valve
Slugbar - Hand Lever with 5 Settings
Deflector - Hand Lever with 6 Settings
REQUIREMENTS FOR OPERATION
PTO Horsepower 65 to 155
PTO Type 1,000 RPM
1-3/8" in diameter shaft w/ 21 splines
Min. Hydraulic Output 8 gpm at 1500 psi
Hydraulic Remote Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
Tractor Weight Must be equal or greater weight than that of a 2650 Balebuster and two bales.

  • Jay-Lor Mixers
  • Gehl Compact Excavactors, Skid Loaders, Telescopic Loaders, and Track Loaders
  • Claas Hay Equipment - Balers, Mowers, Rakes, and Tedders
  • Haybuster Bale Processors, Grain Drills, Mixers, Rock Pickers, and Roller/Hammer Mills
  • Art's Way Grinder Mixers and Roller Mills
  • Manitou Telescopic Loaders and Forklifts
  • Stretch-o-Matic In Line Wrappers
  • SI Feeders Hay Wagons
  • BBI Litter Spreaders
  • BushMaster Attachments - Mowers, Root Grapples, Pallet Forks, Round Bale Spears, Post Hole Diggers, and more
  • Bush-Whacker Rotary Cutters and Finishing Mowers
  • Calumet Spreader and Vacuum Manure Tanks
  • CID Attachments for Skid Steers - Augers, Buckets, Rakes, Grapples
  • Dion Forage Harvesters and Forage Boxes
  • Dryhill Manure Pumps
  • Econoline Trailers
  • Henke Buffalo Mixers and Mills
  • H&S Manufacturing Agricultural Equipment
  • Kelly Ryan Feed Wagons
  • Kuhn Knight Mixers and Manure Spreaders
  • Lifetime Wagons Hay and Feed Wagons
  • Miller Pro Forage Blowers, Forage Wagons, and Trailer Sprayers
  • Roto-Mix Feed Mixers and Manure Spreaders
  • Ag-Bag Silage Baggers
Don Allison Equipment, Inc.
233 Melville Road, Arley, AL 35541 [MAP]

Phone: 800-669-6450    Email: sales@donallisonequipment.com
Copyright 2014 © Don Allison Equipment, Inc.
Product specs & information are subject to change without notice.
Email Us!