Call (800) 669-6450 for prices & more information
HayBuster Balebuster 2655
(Round Bales) |
|
 |
2655 "Shortcut"
All the features of the 2650 Balebuster, plus MORE FLAILS, MORE SLUGBARS, MORE ROTOR SPEED, MORE STRIPPER KITS, and MORE CUT!
Call for Pricing and
Finance Options
|
| Features |
 |
Patented Shredder Chamber with 9 Adjustable Slug Bars and 3 Chain Slat Conveyor
Combining these features with 40 heavy duty flails and high speed rotor, the 2655 shredder chamber will process bales in any condition...wet, frozen, old, new, or with flattened bottoms. The conveyor is slanted so it helps feed the hay/straw into the rotor. The 9 adjustable slug bars allow the operator to adjust the length of the cut, even with a bale in the chamber. |
 |
Tow Stage Bale Loader
The 2655 speeds up the loading process by allowing each bale to be listed separately without disturbing the other bales. The bale loader also carries a second bale, to increase productivity. |
 |
Easily Adjustable Slug Bars
The Slug Bars on the 2655 are easily adjustable from a single point. The slug bar adjustment alters the amount of the rotor exposed to the hay, and is adjusted based on the type of hay, moisture content of the hay and the coarseness/fineness of the cut desired. The slugbars may be adjusted manually or from the cab using the optional hydraulic slugbar. |
 |
Rotor Access Door
The 2655 incorporates a rotor access door, giving you quick and easy access to the rotor for routine inspections and twine removal. The 2655 comes equipped with the maximum number of stripper plates. |
 |
Oil Bath Chain Case - Increases Rotor Speed
The unit is powered through the in line PTO and oil bath chain case. The chain drive increases the RPM of the rotor by 100 rpm when compared to the 2650 Balebuster. |
 |
Inline PTO Driveline
The 2655 features an Inline PTO Driveline for vibration free turns. Haybuster's rugged oil bath chain case reverses rotation and speeds up the rotor. Rotor speed is increased by 100 RPs when compared to the 2650 Balebuster. The inline PTO is available in either a Constant Velocity or a Standard PTO configuration. |
| Balebuster 2655 Specifications |
| Total Weight |
4,700 lbs |
| Tongue Weight (Bale loader fully raised) |
1,300 lbs |
TRANSPORT DIMENSIONS (Bale Loader Fully Raised, Deflector Folded) |
| Width |
8' 4" |
| Length |
14' 11" |
| Height |
11' |
WORKING DIMENSIONS with 1 Bale, Deflector in Spread Position |
| Width |
10' 10" |
| Length |
14' 11" |
| Height |
11' |
WORKING DIMENSIONS with 2 Bales, Deflector in Spread Position |
| Width |
10' 10" |
| Length |
19' 7" |
| Height |
11' |
CHASSIS FEATURES |
| Towing Arrangement |
Clevis type hitch |
| Jack Capacity |
5,000 lbs |
| Jack Travel |
10" |
| Tires |
2) 12.5L x 15 - 8ply |
| Wheels |
2) 10 x 15 - 6 bolt, drop center |
| Bearing Type |
Tapered Roller |
BALE LOADER |
| Type |
Integral 2 Stage, Twin Boom Arms |
| Bale Tines |
Tubular Steel, 10° float, 4 position width |
| Adjustable Hydraulic Cylinder |
4-1/2" x 24", Double Acting |
BALE CONVEYOR |
| Type - 3 Roller Chains with Bolt-on Cross Slats |
| Drive - Hydraulic Orbital Motor with Adjustable Flow Control |
BALE SHREDDER CHAMBER |
| Maximum Bale Size |
6' long x 6-1/2' diameter |
| Maximum Bale Weight |
2,200 lbs |
| Rotor Length |
78" |
| Rotor Diameter (Flails extended) |
25" |
| Rotor Bearing |
Ball, 1-3/4" |
| Number of Flails |
40 |
| Rotor Speed |
1300 RPM |
| Flail Type |
Heavy Duty 7/16" thick
Swinging / Heat Treated Spring Steel |
| Number of Stripper Channels |
3 |
| Number of Slug Bars |
9 |
| Slug Bars |
Single Point Adjustment with 5 settings, 180° range |
| Delivery |
Right Hand Discharge |
| Deflector |
6 Adjustment Settings through a 120° range |
| Max. Horizontal Spread |
Straw, up to 50' |
OPERATOR CONTROLS |
| Loader - 1 Tractor Double-Acting Hydraulic Valve |
| Bale Conveyor - 1 Tractor Double-Acting Hydraulic Valve |
| Bale Coveyor Speed - Conveyor Speed Control Valve |
| Slugbar - Hand Lever with 5 Settings (optional hydraulic adjustment) |
| Deflector - Hand Lever with 6 Settings (optional hydraulic adjustment) |
REQUIREMENTS FOR OPERATION |
| PTO Horsepower |
65 to 155 |
| PTO Type |
1,000 RPM
1-3/8" in diameter shaft w/ 21 splines |
| Min. Hydraulic Output |
8 gpm at 1500 psi |
| Hydraulic Remote Controls |
2 Double-Acting Control Valves with Quick Coupler Outlets |
| Tractor Weight |
Must be equal or greater weight than that of a 2655 Balebuster and two bales. |
| Balebuster 2655 Options |
Tires |
| 12.5L x 15 8-ply Implement Tires (set of 2) |
| 31 x 10.5 x 15-ply load rating "C" Highway Rated Tires (set of 2) |
| 14L x 16.1 8-ply Flotation Tires (set of 2) |
Wide Deflector Belt |
| The 18" wide deflector belt, is used when bunk feeding to inhibit the hay fines from being delivered beyond the deflector shield. |
Hydraulic Deflector Control Kit |
| This option allows the operator to control deflector and rack positions from the operator's seat. |
Hydraulic Slugbar Kit |
| This option allows the operator to adjust the slugbar from the operator's seat. |
24 bu Feed Tank |
| The 24 bu Feed Tank is used to meter and apply a grain or supplements to the windrow. The 24 bu Feed Tank has a capacity of 24 bushels, and requires 1 set of hydraulic outputs with a minimum output of 8 gpm at 1500 psi. |
Digi-Star EZ 2000 Series Electronic Scale |
Functions
Weighs only the bale in the shredder chamber. Net/Gross Mode for determining the new weight or the total weight on the scale (gross weight). Tare Feature provides a temporary zero for easier operation.
Features
EZ View 2000's Oversized Display
Scrolling built-in Help Messages
Microprocessor Design
Audio/Visual Feedback from Switches
Rugged Indicator Case made out of Lexan
Gold-Plated Contacts
Self-Diagnostics Testing
Lbs./kg Selection
International Features and CE Approved
Bolt-On Load Cells Mounts
Four Point Load Cell Mounting |
Fenders Kit |
| This kit includes right & left fenders, and uses existing hardware. |
Road Lights Kit |
| This kit includes right and left rear light assemblies, wiring harness, mounts, and hardware. |
Axle Extension Kit |
| Extends the 2650's axles 12 inches on each side for stability in uneven and steep terrain. |
|
|
