Call (800) 669-6450 for prices & more information
HayBuster 2800 Balebuster
(Round + Square) |
|
 |
The 2800 Balebuster processes large square or round bales - perfect for range feeding, bunk feeding, bedding, erosion control, or odor control on waste water lagoons.
Call for Pricing and
Finance Options
6mb
|
- Right hand discharge
- Two stage hydraulic deflector
- Heavy duty fixed chamber
- Variable speed live floor with 3 chain slat conveyor
- Heavy duty conveyor frame
- Oil bath chain case w/ double 60 roller chain - reverses direction and increases rotor speed
- Heavy duty 9" x 26" rotor with 40-3 lb flails
- Rotor access doors for easy maintnenance
- Dual action loading arms lay round and square bales in the chamber with ease
- Single hydraulic remote - controls entire unit
- Optional hydraulic slug bar adjustment
- Common bearings and chains w/ twine protection
- 90 to 200 hp tractor
|
| Features |
 |
9' Bale Chamber
The 2800 is equipped with a 9' bale chamber for processing all round and square bales. |
 |
Heavy Duty Fixed Shredded Chamber with 3 Chain Slat Conveyor
Combining these features with the heavy duty flails and high speed rotor, the 2800 Heavy Duty Fixed Shredder Chamber will process bales in any condition - wet, frozen, old, new, or with flat bottoms. The conveyor is slanted so it helps feed the hay/straw into the rotor. |
 |
Hydraulically Adjustable Slug Bars
The hydraulically adjustable slug bar allows the operator to adjust the cut, even with a bale in the chamber. |
 |
Rotor Access Door
The 2800 is equipped with rotor access doors, giving you quick and easy access to the rotor for routine inspections and twine removal. |
 |
Oil Bath Chain Case and High Speed Rotor
The 2800 features an oil bath chain case with double 60-roller chain that reverses the direction of the PTO and increases the speed and efficiency of the rotor. The heavy duty 9' x 26" rotor with 40 3lb flails processes both dry hay and sileage bales. |
| Balebuster 2800 Specifications |
WEIGHT |
| Total |
7,300 lbs |
| Tongue (Bale loader fully raised) |
2,550 lbs |
| Tongue (Bale loader down) |
2,150 lbs |
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded) |
| Width |
101" |
| Length |
211" |
| Height |
102" |
WORKING DIMENSIONS (with 1 bale, deflector in spread position) |
| Width |
130" |
| Length |
290" |
| Height |
102" |
WORKING DIMENSIONS (with 2 bales, deflector in spread position) |
| Width |
130" |
| Length |
329" |
| Height |
120" |
CHASSIS FEATURES |
| Towing Arrangement |
Clevis type hitch |
| Jack Capacity |
5,000 lbs |
| Jack Travel |
10" |
| Tires |
2) 16.5 x 16.1 - 10 ply |
| Wheels |
2) 16.1 x 12 - 8 bolt drop center |
| Bearings |
Tapered Roller |
BALE LOADER (with position indicator) |
| Type |
Twin Boom Arms with Squeeze Arms for square bales |
| Bale Tines |
Tubular Steel, 10E Float, 4 position width adjustment |
BALE CONVEYOR |
| Type |
3 Roller Chains with Bolt-on Cross Slat |
| Drive |
Hydraulic Orbital Motor with Adjustable Flow Control |
CHAIN CASE |
| Sealed Oil Lube Chain Case - Reverses rotation and increases rotor speed. Double 60 Roller Chain |
BALE SHREDDER CHAMBER |
| Max Bale Size - Round |
6' long x 6-1/2' diameter |
| Max Bale Size - Square |
52" x 52" x 8' |
| Max Bale Weight |
2,200 lbs each |
| Rotor Length |
108" |
| Rotor Diameter (flails extended) |
26" |
| Rotor Bearing |
Ball, 1-3/4" |
| Number of Flails |
40 |
| Flail Type |
Heavy Duty, 7/16" thick, 3lb
Heat Treated Spring Steel, Swinging |
| Stripper Channels |
Optional |
| Number of Slug Bars |
7 |
| Slug Bar Type |
Single Point, 5 adjustment settings |
| Delivery |
Right Hand Discharge |
| Deflector |
Split, Hydraulic with infinite settings through a 120E range |
| Max. Horizontal Spread |
Straw, up to 50' |
OPERATOR CONTROLS |
| Loader, Conveyor, Deflector and Squeeze Loader - 1 remote with electric over hydraulic, finger tip controls |
| Bale Conveyor Speed - Conveyor Speed Control Valve |
| Slug Bar - Hand lever with 5 settings and optional hydraulic adjustment |
| Deflector - Hydraulic with Split Deflector (can be offset) |
REQUIREMENTS FOR OPERATION - TRACTOR |
| PTO Horsepower Required |
90 to 155 |
| PTO Type |
1000 RPM, 1-3/8" dia PTO shaft w/ 21 splines |
| Min. Tractor Hydraulic Output |
8 gpm at 1500 psi |
| Tractor Hydraulic Controls |
1 double-acting control valve with quick coupler outlets |
| Tractor Weight |
Must be of equal or greater weight than that of a 2800 with 2 bales |
|
|
