HayBuster GP-50 Grain Processor for sale

Call (800) 669-6450 for prices & more information

HayBuster GP-50 Grain Processor

<< Roller/Hammer Mills < HayBuster

Printable Brochure

The 50" hammermill is fitted with triple hammers (132 hammers) placed in a spiral V pattern for increased grinding capacity.
14" belly auger provides fast and positive removal of ground product from under the hammermill.
Variable speed 18" x 20' hydraulic folding stacking conveyor carries the product away from the hammermill and belly auger.

Call for Pricing and
Finance Options

Features
	18" x 20' Stacking Conveyor The variable speed 18" x 20' hydraulic folding stacking conveyor carries the product away from the hammermill and belly auger.
	90 degree Tilt Hopper Both hoppers open a full 90 degrees for access to the hammermill and screens as well as for normal servicing.
	Two Hopper Options Options include your choice of the standard tilt baffled hopper with or without the 12" hydraulic loading auger (5000 bu/hr) with 15" low profile hopper, or the larger adjustable baffled loader hopper (127" x 88", 103 bu), which will allow feeding with a front end loader.
	50" Hammermill The 50" hammermill is fitted with tripple hammers (132 hammers) placed in a spiral V pattern for increased grinding capacity. Multiple Screen Options Screens are the same size as Haybuster's H-1100 tub grinder, and come in sizes from 1/8" to 8" round and a dummy open screen.
	14" Belly Auger The 14" belly auger provides fast and positive removal of ground product from under the hammermill.
	Optional Loading Auger The 12" auger is used with the low profile hopper (15" high) to unload all types of trucks and semi's. The auger is powered by two in-series hydraulic motors with infinite speed settings, and is rated at 5000 bushels per hour.
	Hydraulic Controls Stacking conveyor has lift, fold and belt hydraulic drive with infinite belt speed adjustments. Hoppers tilt hydraulically, and the optional loading auger has dual hydraulic in-series motors with infinite speed control.
	Eight Belt Drive System The tub drive hydraulic pump is directly coupled to the hammermill shaft to eliminate extra pulleys, belts, and tighteners. Power from the tractor is transmitted at 1000 rpm to the GP-50 through a PTO shaft. A tough 8-belt drive system multiplies the PTO rpm by approximately 2.5 times and supplies it to the hammermill shaft. The higher hammermill speed provides for a more even and smoother feed rate, plus it increases the grinding capacity. The drive system has been improved to handle up to 300 PTO hp.

WEIGHT
GP-50 Grain Processor Specifications
with Small Hopper & Auger	7,300 lbs
with Small Hopper	6,620 lbs
with Large Loader Hopper	7,410 lbs
Tongue Weight	1,600 lbs (w/ Small Hopper & Loading Auger)
DIMENSIONS
Transport Width	7' 9"
Transport Height	10' 2"
Transport Length	22'
Working Width w/ Auger	22' 2"
HAMMERMILL
Speed	2550 rpm at 1000 PTO rpm
Length	50"
Diameter	26" w/ hammers extended
Hammers	3/8"
# of Hammers	132 in spiral V pattern
Rods	15/16" case hardened
Cylinder Plates	1/4" thick x 15-3/4" dia.
Cylinder Shaft	3-1/2" stress proof steel
Cylinder Bearings	3" pillow block
SCREENS
Sizes	1/8", 3/16", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", 4", 5", 6", 7", 8", open
Belly Auger	14" powered from PTO via jack shaft
DISCHARGE CONVEYOR
Type	Rubber Belt with 1-1/2" Cleats
Drive	Hydraulic w/ infinite belt speed adjustments
Length	20'
Width	18"
Lift & Fold	Hydraulic
Min Discharge Height	12"
Max Discharge Height	15' 7"
LOADING AUGER (Optional)
Auger Size	12"
Capacity	5000 bu/hr
Hopper Dimensions	15" depth x 60" length x 30" width
Poer	Dual hydraulic in-series motors with infinite speed control
HOPPER SIZES/CAPACITIES (both hydraulically tilted)
Small Baffled	55" x 44"
Loader Hopper	127" x 88", 103 bu
HYDRAULIC REQUIREMENTS/CAPACITIES
Hydraulic Reservoir	46 gal, in self contained hydraulic system
# of Tractor Outlets	2 @ 8 gpm/1500 psi One tilts grain, the second runs all other functions
CHASSIS FEATURES
Towing Arrangement	Clevis hitch
Tires/Rims	2) 31.5x10.5 x 15R LT Tires, Load Range C
Bearings	Tapered Roller Bearings
REQUIREMENTS FOR OPERATION TRACTOR
1000 rpm PTO Min. PTO horsepower - 200 Max. PTO horsepower - 300 PTO Shaft Size: 1-3/8" or 1-3/4", 1000 rpm
OPTIONS
Hopper Options: Standard tilt baffled hopper with or without the 12" hydraulic loading auger with 15" low profile hopper Larger adjustable tilt baffled loader hopper (121" x 88", 103 bu), which will allow feeding with a front end loader. Grinding Screen Options: 3" round hole, screen half (standard) 4" round hole, screen half (standard) 1/8" round hole, screen half* 3/16" round hole, screen half** 1/4" round hole, screen half 3/8" round hole, screen half 1/2" round hole, screen half 5/8" round hole, screen half 3/4" round hole, screen half 1" round hole, screen half 1-1/2" round hole, screen half 2" round hole, screen half 5" round hole, screen half 6" round hole, screen half 7" round hole, screen half 8" round hole, screen half Dummy (open), screen half * 1/8" thick, ** 3/16" thick, all other screens are 1/4" thick