Miller Pro 1060 Forage Blower
- 540 or 1000 RPM Drive
- 60" Diameter Impeller Housing
- 12" Diameter Auger Mounted at 30 degrees
- Heavy 8 Paddle Fan Assembly with Rotating Back Plate
- 40/50 Carbon Steel Blades
- Sharpened Shear Bar keeps Paddle Tips Clean
Want to fill a 135' tall silo? No problem with the Miller Pro forage blower. High volume, high velocity and high performance are its specialty. The Power Paddle Design with a 35 degree paddle angle generates a powerful air stream moving more material with less power. The hopper design includes a 12" diameter auger that feeds forage into the fan at a 30 degree angle which offers greater forage volume to the blower. The sharpened adjustable shear bar keeps paddle tips clean, prevents hair-pinning carry-over and power loss. All material goes into the pipe. This assures you are getting the highest capacity forage blower available on the market today. The Miller Pro blowers are available with 540 or 1000 R.P.M. PTO.
Call for Pricing and Finance Options
Miller Pro 1060 Forage Blower - Series II Series II blowers have more capacity, run smoother and use less horsepower. |
||||
 Large hopper intake area Auger trough distributor Large transition opening Heavy 8-paddle fan Power paddle design Sharpened shear bar Heavy PTO drive line
Auger trough distributor moves the flow of material into the fan housing faster.
Large transition opening allows a smoother flow of material into the fan.
Large hopper area increases blower capacity and allows easy forage box positioning.
12" diameter auger feeds forage into the fan at 30° angle. Inserts material into the air stream at nearly the same plane as rotation for greater efficiency.
Flexible wind guards on hopper sides keep clean-up to a minimum.
Auger clutch handle operable from front, side and rear of blower.
Water hose connection directs nozzle to autger end. A second inlet is positioned through the blower band.
|
 
Blower outlet easily removable for quick inspection and maintenance, without loosening housing band.
60" diameter impeller housing. Heavy eight-paddle fan and rotating back plate provide non-stop filling and virtually eliminate plugging. Paddles made from 40/50 carbon steel to resist wear and corrosion.
Sharpened adjustable shear bar keeps paddle tips clean. Prevents hair-pinning, carry-over and power loss. All material goes up the pipe.
Reversible housing band.
Kevlar© drive belts last longer and are less susceptible to stretching.
Transport wheels are equipped with tapered roller bearings. |
Adjustable hitch with jack stand.
Heavy duty PTO drive line is shear bolt protected.
Convenient screw jack wheel height adjustment. 4.8 x 8 wheels and tires. MILLER PRO reserves the right to change its products or this description at any time without notice or obligation. Some equipment displayed here may have shields and guards removed for photographic purposes. Never operate equipment with safety shields or guards open or removed.
|
||
