• Independent Rake Wheel Suspension
• High Clearance Frame
• 60" Diameter Rake Wheels
• Wide Wheel Stance for Greater Stability

Call for Pricing and Finance Options

• High clearance ACTION rakes have greater clearance in the raking position and more stability during transport than the competition.
• The backbone and wing design, when raised, allows the uniform release of crop to finish the windrow.
• An adjustable hitch allows you to level the rake for efficient raking.
• There are multiple width adjustments on the wheel rake beam for setting the windrow width. Raking width is easily adjusted by a single pin and clip.
• 60" – 7.5mm rake wheels w/tapered greaseable bearings
• The spring suspension system allows each rake wheel to float independently over the ground.
• Hydraulic hoses & tips included
• New 15" tires
• A standard feature is a one-sided raking kit that allows you to manually close off a hydraulic valve for either rake wing when the rake is in the transport position. The hydraulic valves are also used as a lock for transport.
• Turnbuckles on each rake arm allow you to adjust the windrow raking width to one of the two windrow width holes.

Independent Rake Wheel Suspension

The spring suspension on each 60" rake wheel allows it to float independently over the ground. Down pressure for each 60" rake wheel can also be adjusted independently by the rod nuts on each rake arm/spring assembly

Width Adjustments

There are multiple width adjustments on the wheel rake beam for setting the windrow width. Just place the pin in the hole that optimizes windrow size for all 3200 series models

Set Down Travel

Adjusting the arm rod assembly ring nuts of each rake arm sets the amount of down travel on each rake beam.

Winged-Hinge Engineering

Uniform beam pick-up eliminates tail drag. It’s simple and easy to make pressure adjustments to the rake wheels.

Transport Position

Rake shown in the transport position with optional tandem axle assembly.

Rake Wheel Pivots

Rake wheel pivots (C) provide additional ground flexibility on all 3200 series rakes.

One-Sided Raking Kit

Manually close off a hydraulic valve on either side when the rake is in the transport position.

Turnbuckle Kit

A turnbuckle on each rake arm adjusts the windrow raking width to one of the two windrow width holes.