The CMF-830 has a 830 cu. ft. mixing capacity with a tare weight of 21,500 lbs.
Call for Pricing and Finance Options
Observation Windows
The CMF-830 has observation windows on the right and left sides of the machine.
Large 24"x42" Unloading Door
Large 24"x42" Unloading Door for fast, even unloading and cleaning
Versatile 36" wide Cross & Unloading Conveyor
Cross Conveyor only with right or left hand drives.
Cross Conveyor with spouts or endgates. Magnets are available for the spouts.
Cross Conveyor with hydraulic conveyor extension. Available in right hand, left hand, or both right and left hand unload. The dual discharge unit can only unload from one side at a time. Spouts and optional magnets are also available.
18-5/8" to 47" discharge height
88" Heavy Duty Twin Augers with 7 Knives per Auger
Heavy duty 88" twin screw augers, with self sharpening serrated knives, driven by 2 HD USA gearboxes that are covered by a 2 year warranty.
Digi-Star Four Point Scale with choice of optional Digi-Star Monitors
The CMF-830 is equipped with a Digi-Star 4 pt. scale and EZ 3500 V monitor. All other Digi-Star monitors and scale heads are available. The Digi-Star system is powered by a standard onboard 12 volt battery. Digi-Start feeding programs are also available.
Free Motion Clutches on Driveline
Free motion clutches on the driveline protect the heavy-duty gear boxes. Gear boxes come with a 2 year warranty. The optional 2 speed gearbox is used for loaded startups and heavy rations.
4-Point Scale
4-point scale for accurate weighing, with reduced scale bounce during loading and feeding.
Oscillating Heavy Duty Axles
Oscillating Heavy Duty Axles with 4) 315/80R 22.5 20 ply tires provide even weight distribution on uneven and frozen ground.
Heavy Duty Frame
The CMF-830 is built with a heavy duty 6"x9"x1/4" steel tube frame for strength and longevity.
Optional Magnets
Magnets on the discharge chutes remove metal, such as bale wire, from feed.
Dogleg Conveyor
Optional Dogleg Conveyor is available
CV PTO or optional 2-Speed Gear Box
The CMF-830 comes equipped with either a Heavy Duty Constant Velocity 1000 rpm PTO with an optional 2-Speed Gear Box. The 2-Speed Gear Box is used for loaded start-ups and heavy rations.
CMF-830 Vertical Mixer Specifications
CAPACITIES
Mixing Capacity w/ 12" Extension
830 cu ft
Gross Weight Capacity
39,400 lbs
Tare Weight - TMR
21,500 lbs
AUGERS
Number
2
Diameter
88"
Flighting Thickness
5/8"
Number/Thickness of Knives
14-1/4" self sharpening
UNLOADING/CONVEYOR
Door Size
24" x 42"
Conveyor
36" Chain with Hydraulic Orbital Motors
Discharge
Left, Right, or Both
Dogleg Option
30"
CONSTRUCTION
Floor Thickness
5/8"
Sidewall Thickness
1/4"
Observation Windows
2
DRIVE LINE & GEAR BOXES
1-3/4" constant velocity 1000 rpm PTO shaft
Protection: Free motion automatic clutches (2)
SCALE
Digi-Star 4 point scale with optional monitor
WEIGHT
Total
17,900 lbs
Tongue Weight
2100 lbs
TRANSPORT DIMENSIONS (Fully raised conveyor)
Width
10' 2"
Length
24' 6-1/8"
Height
10' 7-1/4"
WORKING DIMENSIONS
Loading Height with Extensions
9' 5"
Width
10' 2" to 12'", depending on conveyor
Loading Height w/ Ext
9' 8"
CHASSIS
Towing Arrangement
Clevis Type Hitch
Jack Capacity
7,000 lbs
Jack Travel
10"
Tires
4) 315/80R22.5 22 ply
Wheels
4) 22.5 x 9-10 hole
Axle
Oscillating
Bearings
Tapered Roller
Extensions
12" rubber
REQUIREMENTS FOR OPERATION - TRACTOR
PTO Horsepower Required
150 minimum
PTO Requirement
1000 rpm, 1-3/4" w/ 20 spline
Min. Tractor Hydraulic Output
8 gpm at 1500 psi
SMV Signs & Road Lights
Standard
Electrical
12 VDC (Battery included)
OPTIONS
Magnets on Discharge Spouts - Magnets on the chutes/spouts remove ferrous metal, such as bale wire, from feed.
Left, Right, or Dual Discharge Conveyors - Optional left, right, or dual discharge conveyors provide the ultimate flexibility for feeding applications.
Dogleg Style Conveyor
Unloading Options
Cross Conveyor only with right or left hand drives.
Cross Conveyor with spouts or endgates. Magnets are available for the spouts.
Cross Conveyor with hydraulic conveyor extension. Available in right hand, left hand, or both right and left hand unload. The dual discharge unit can only unload from one side at one time. Spouts and optional magnets are also available.
Rear Discharge Door - The optional rear discharge door provides an additional means of discharging feed.
2 Speed Gear Box - The 2 speed gear box is used for heavy starts after transporting heavy rations to protect the tractor PTO and mixers drive train.