| Frame
The
main frame is the foundation of any bagger and it is
critical that the frame stay rigid to keep the rotor
running true. The Ag-Bag 6000 series frames are made
out of heavy wall structural steel tubing and heavy
gauge flat plate throughout to create a solid foundation
to an exceptional bagger.
Rotor Design
The rotor and tunnel design are the key to a well packed
bag. Ag-Bag started in 1978 and was the first company
in the United States to build bagging machines. Ag-Bag
wrote the book on where the rotor needed to be placed,
how wide it had to be to for a given tunnel size, how
many teeth the rotor needed and where they had to be
positioned. Low rotor position provides consistent packing
through the entire bag.
Replaceable wear
strips on teeth
Conveyor(s)
- Straight conveyors
for baggers with 6' rotors
- Optional Split conveyors
for baggers with 7' rotors
- 30" wide conveyor
for high capacity
- Lower clean out door
for long life
- CA550 roller chain
for smooth operation and long life (top driven)
- Conveyor moves with
a cable and winch, hydraulic slide optional
Large hopper
for increased capacity
Self-Contained
Hydraulic System
The G6060 baggers are equipped with a self-contained
hydraulic system that runs off the dual output gear
box.
The self-contained hydraulic system allows you to operate:
- The variable speed
feed conveyor from ground level
- Does not create heat
in the tractor hydraulic system and allows the use
of older vintage tractors with low volume hydraulics
- Operate the optional
variable speed cable rewind system
- Operate the optional
hydraulic conveyor slide system
Cable, Cable Drum
Brake(s) & Back Stop
The dual cable system allows you to make a well compacted
bag with ease. Large industrial disc brake(s) and a
simple brake hand pump and brake pressure gauge control
the rate of cable release. Ag-Bag bags have convenient
“stretch gauges” continually along the bag to insure
consistency. The bag back stop is a heavy duty steel
frame webbed with rope to insure no damage to the bag.
An optional lightweight aluminum back stop is also available
for the G6060 baggers.
Drive System
- Double 120 roller chain
to drive the rotor
- Large planetary gear
box to drive the rotor on the G6070P model
- Heavy duty PTO shaft
with shear protection
- Power requirements
on the PB6000, G6060 & G6070 models only need
a maximum of 120 HP!
- The horsepower requirements
on the G6070P planetary drive model is only a maximum
of 120 HP but can take up to 150 HP!
- Bag Boom & Bag
Cradle. All models are available with a bag boom and
bag cradle.
- Makes installing the
Ag-Bag bag quick and easy
- Aids in installing
different tunnel sizes and/or tunnel extensions
- Can be used to place
the back stop onto the transport braces
Transport
- Transport lights, slow
moving vehicle sign and reflective tape are used to
mark the bagger for transport
- The G6060 can be narrowed
to an 8-1/2' transport width
Inoculant Package
To insure top quality feed Ag-Bag recommends the use
of specially formulated Ag-Bag Inoculants. Both liquid
and granular inoculants along with applicators are available
to help insure top quality feed.
The Feed Quality
Solution
Miller Ag-Bag® has pioneered the system and the solution
for creating high quality feed. It goes way beyond simply
putting feed in a bag. It means having the right machine,
the right packing design, along with the bags and inoculants
designed to complete the process.
Tunnels &
Tunnel Extensions
- G6060 bagger can be
ordered with interchangeable 8' or 9' tunnels — 8'
x 24" and/or 9' x 24" tunnel extensions
are optional
- Tunnel extensions increase
bag capacity by packing silage tighter. They also
create a smoother bag.

| 6000
SERIES Specifications |
| |
PB6000 |
G6060 |
G6070 |
G6070P |
| Tractor PTO RPM |
540 |
540 |
540 |
1000 |
| Right Angle Gear Box |
Single Output |
Dual Output |
Dual Output |
ML-120 |
| Final Drive |
Double 120
Roller Chain |
Double 120
Roller Chain |
Double 120
Roller Chain |
RA3500 Planetary |
| Rotor Width |
6' |
6' |
7' |
7' |
| Number of Rotor Teeth |
36 |
48 |
56 |
56 |
| Rotor Bearing - Drive Side |
Footed Spherical
2-5/16" |
Footed Spherical
2-5/16" |
Footed Spherical
3-7/16" |
Planetary Gear
Box |
Rotor Bearing -
Non-Drive Side |
Footed Spherical
2-5/16" |
Footed Spherical
2-5/16" |
Footed Spherical
2-5/16" |
Footed Spherical
2-5/16" |
| Cable &
Back Stop |
| Cable Length (appx) |
200' |
200' |
250' |
300' |
| Cable Brakes |
Single
Disc Brake
w/ Industrial Brake
|
Dual
Disc Brakes
w/ Industrial Brakes |
| Brake Hand Pump |
Single
Stage with Pressure Gauge & Adjustment Control |
| Hydraulic Cable Rewind |
N/A |
Optional |
Optional |
Standard |
| Steel Back Stop |
Standard |
| Aluminum Back Stop |
N/A |
Optional |
Optional |
Optional |
| Max. Bag Length |
200' |
200' |
250' |
300' |
| Conveyor |
Single Chain Conveyor (30'x11")
w/ CA550 Roller Apron Chain |
Standard |
Standard |
N/A |
N/A |
Split Conveyor (30'x135")
w/ Two CA550 Roller Apron Chains |
N/A |
Optional |
Standard |
Standard |
| Winch to Extend Conveyor |
Standard |
Standard |
Standard |
Standard |
| Hyd. Cylinder to Extend Conveyor |
N/A |
Optional |
Optional |
Optional |
| Self-Contained
Hydraulic System |
| Bagger mounted self-contained hydraulic
system to operate conveyor & accessories |
N/A |
Standard
Variable rate speed control for conveyor and cable
rewind |
| Tunnels
& Tunnel Extensions |
| 8' Tunnel |
Yes - Not Interchangeable |
Yes - Interchangeable |
N/A |
| 9' Tunnel |
Yes - Not Interchangeable |
Yes
- Interchangeable |
| 10' Tunnel |
N/A |
Yes
- Interchangeable |
| 8' x 24" Extension |
N/A |
Optional |
N/A |
| 9' x 24" Extension |
N/A |
Optional |
Standard
w/ 9' Tunnel
|
| 10' x 24" Extension |
N/A |
Standard
w/ 10' Tunnel |
| Bag
Boom & Cradle |
| Bag Boom w/ Brake Style Winch |
Optional |
Standard |
| Bag Cradle |
Standard |
Standard
with Choice of 9' or 10' Tunnel |
| Innoculant
Application Package |
Dry
or Liquid |
Optional |
| Transportation |
| Two Way Tow |
N/A |
Standard |
| Transport Width |
14' 6" |
8'
6" |
Transport
Lghts, SMV Sign & Reflective Tape |
Standard |
| Tires |
9.5L x 15
Implement |
235/85R16
Radial Highway |
265/75R16
Radial Highway |
| Specifications |
Overall
Width - Trucking |
8'
6" |
| Overall Width - Transport |
14'
6" |
8'
6" |
| Overall Width - Working |
16'
8" |
18' |
21' |
21' |
| Overall Length -
Transport |
12' |
18' |
20'
10" |
20'
10" |
| Overall Length -
Working |
12' |
12'
w/o Ext
14' w/ Ext |
12'
w/o Ext
14' w/ Ext |
12'
w/o Ext
14' w/ Ext |
| Overall Height -
Transport |
8'
w/ Boom |
8'
7" w/o Boom
11' 6" w/ Boom |
9'
7" w/o Boom
11' 6" w/ Boom |
12'
w/o Boom
14' w/ Boom |
| Horsepower - min |
70 |
80 |
80 |
80 |
| Horsepower - max |
120 |
120 |
120 |
150 |
|