Don Allison Equipment, Inc.

Your source for quality equipment and service
Call Us! 800-669-6450 • Email: sales@donallisonequipment.com

GEHL R105 Skid Loader

Gehl R105 Skid Loader
Net Power:33.1 hp
Maximum Torque:80 ft-lbs.
Rated Operating Capacity:1,050 lbs.
Gross Power:34.7 hp
Height to Hinge Pin - Fully Raised:108.1"
Call for Pricing and Finance Options

Performance

The R105 is built for efficiency. Super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions.
  • Longer wheelbase and a low center-of-gravity offer a smooth, stable ride.
  • Hydraloc™ automatic interlock system locks lift, tilt and drive systems when the operator leaves the seat, increasing operator safety. System also engages when the restraint bar is raised or the ignition switch is turned off.
  • Lift arm hydraulic tubes are concealed and protected from the work environment.
  • Rated operating load can be readily increased with the addition of a counterweight.

Operator's Cabin

A large operator’s compartment with clear front, side and rear sight lines provides operators full, expansive views for increased safety.
  • ROPS/FOPS Level II is standard for extra operator protection.
  • Roof grid section and window provide excellent bucket visibility at full height.
  • Adjustable operator restraint bar offers secondary protection and serves as a padded armrest.
  • Lockout system shuts down lift/tilt functions when optional front door is opened.
  • Open canopy, open canopy with door and enclosed cab with heat are available.

Controls

Ergonomic controls in the R105 Skid Loader provide smooth loader and attachment operation.
  • Hand and foot throttle are standard equipment, providing quieter operation and less fuel consumption
  • T-Bar hands-only drive control system

Engine

Equipped with a powerful 33.1-hp (24.7 kW) Yanmar diesel engine, the R105 Skid Loader can tackle any challenge.
  • Liquid-cooled for superior performance in all weather conditions.
  • Excellent cold weather starting with glow plug assist system.

Hydraulics

The R105 provides 14.5 gpm (55 L/min) of hydraulic flow powering a variety of attachments to get work done faster.
  • Direct-drive hydrostatic pump with self-neutralizing feature provides 100% efficient drive from engine to pump, requiring no maintenance
  • Hydraloc™ Automatic Interlock System increases operator safety by locking lift, tilt and drive systems when the operator leaves the seat, raises the restraint bar or turns off the ignition switch.

Attachment System

A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their R105 the most versatile machine on the job site. Popular attachments are listed below.
  • Augers
  • Bale Forks
  • Blades
  • Brooms
  • Grapples
  • Pallet Forks
  • Rakes
  • Snow Removal

Lift Arm

Strong lift arm provides strength, durability and excellent view of the tires and sides of the loader for increased precision and safety.

Serviceability

The R105 has an ingenious design, including low-maintenance components and easy maintenance access.
  • Entire ROPS/FOPS structure pivots back, with gas-spring assist, for full, easy access to the internal hydraulic components.
  • Swing-open rear door and flip-up engine cover fully expose maintenance access points to engine, battery, filters and filler caps.
  • Maintenance-free axles are lubricated and sealed for long life.
  • Removable access plates for clean out.
R105 SPECIFICATIONS
DIMENSIONS
Overall Operating Height - Fully Raised 139.6"
Height to Hinge Pin - Fully Raised 108.1"
Overall Height to top of ROPS 70.3"
Overall Length with Bucket 114"
Dump Angle at Full Height 42°
Dump Height 84.5"
Dump Reach at Full Height 22.8"
Rollback at Ground 29°
Rollback Angle at Full Height 99°
Seat to Ground Height 32.6"
Wheelbase 34.5"
Overall Width - Less Bucket 48.4"
Bucket Width 55"
Ground Clearance to Chassis 6.0"
Overall Length - Less Bucket 88.9"
Departure Angle 26°
Clearance Circle - Front w/ Bucket 69.4"
Clearance Circle - Front w/o Bucket 44.1"
Standard Tire Size 27x8.5x15 HD
ENGINE
Make Yanmar
Model 3TNV88C-KMS Tier IV
Gross Power @ rpm 25.5 hp @ 2500
Net Power @ rpm 24.7 hp @ 2500
Maximum Torque @ rpm 80 ft.-lbs. @ 1680
Displacement 100 cu.in.
HYDRAULIC SYSTEM
Auxiliary Hydraulics - Standard 14.5 gpm
Reservoir Capacity 8 gal.
ELECTRICAL SYSTEM
Battery 12-volt
Starter 12-volt
Alternator 40-amp
CAPACITIES AND WEIGHTS
Rated Operating Operating Capacity 1050 lbs.
Rated Operating Capacity with opt. Counterweight 1175 lbs.
Fuel Tank 10.4 gal.
Travel Speed Maximum 5.9 mph
Operating Weight - approx. 4000 lbs.