H&S Manufacturing 7+4 Feeder Box
The H&S 7+4 Feeder Box is available in front unload or front and rear unload.
Call for Pricing and Finance Options
Feeder Elevator
This picture shows the feeder elevator in the level unloading position to illustrate the reach from side of box.
Tandem Trailer
The H&S Feeder Box is mounted on a 12 ton oscillating tandem trailer with 12.5Lx15 tires and equipped with a swing away jack.
Truck mount is optional.
Easy Controls
Very simple, easy to operate electric control that mounts on the tractor or in the truck cab.
7+4 Feeder Box Specifications |
Power |
Hydraulic drive |
Hydraulic Requirements |
2000 psi, 10 gpm |
Power Apron Drive |
Worm gear bronze |
Speeds |
Infinite variable |
Main Aprons |
4 chains - 667h pintle |
Beaters |
2-18" diameter, 4 spiral bar |
Beater Drive |
#50 roller chain |
Cross Conveyor |
#550 roller chain or angle cross slats
|
Cross Conveyor Drive |
Sproket and #50 roller chain |
Cross Conveyor Width |
22" |
Discharge |
Left side unloading elevator |
Discharge Opening |
533 sq.in. |
Discharge Height |
Minimum 33", Maximum 39" |
Inside Length |
16' |
Inside Width |
7' 4" |
Inside Height |
48" |
Capacity |
Struck level-454 cu.ft., by weight 20,000# |
Overall Length |
23' 7" |
Overall Width |
Conveyor up 9' 8", Conveyor down 12' 4" |
Overall (Loading) Height |
8' 2" |
Weight |
5570# |
Sides and Floor Inside Box |
3/4" plywood-poly bonded to plywood |
Tires |
12.5L x 15, tandem |
Rub Rail - Wood |
Standard |
Hwy. Light Pkg |
Standard |
Emergency Stop Mechanism |
Standard |
Electric Controls |
Standard |
Truck Mount |
Optional |
Height |
69" from bottom of frame to top of box |
Min. Truck Cab to Ctr. of Axle |
150" recommended |
Copyright © 2024 Don Allison Equipment, Inc.
Product specs & information are subject to change without notice.