Don Allison Equipment, Inc.

Your source for quality equipment and service
Call Us! 800-669-6450 • Email: sales@donallisonequipment.com

H&S Manufacturing HD Twin Auger Forage Box

H&S HD Twin Auger Forage Box
The HD Twin Auger Forage Box utlilizes 2 high speed cross augers. The twin auger extends beyond the side of the head to eliminate spillage. You can always depend on H&S forage boxes.
Call for Pricing and Finance Options

3-18" 4 Har HD Spiral Type Beaters

H&S Manufacturing HD Twin Auger Forage Box
H&S uses three - 18" 4 bar HD spiral type beaters - not augers. The beaters feed evenly and are aggressive in handling tough material. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1 1/4" equipped with greaseable bearings.

Simple Variable Speed Drive

H&S Manufacturing HD Twin Auger Forage Box
A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. A bronze worm gear is standard. #80 drive chain drives the main apron drive shaft. The main apron drive shaft is 1 3/4" stress proof shafting. Main apron unload rate is variable and ranges from 9" up to 12' 6" per minute.

Start and Clear the Beaters before you start the Main Apron Conveyors

H&S Manufacturing HD Twin Auger Forage Box
A separate clutch allows you to start and clear the beaters before you start the main apron conveyors. The HD clutch can be used to engage just the cross conveyor, the cross conveyor and beaters, or the cross conveyor, beaters and main floor apron in any speed.

Dual Belt Clutch

H&S Manufacturing HD Twin Auger Forage Box
Shields are removed to show the dual belt clutch which is the primary drive source. The emergency stop mechanism is built into the drive unit and can be activated from the front, sides or rear of the box.

10" High Speed Cross Augers

H&S Manufacturing HD Twin Auger Forage Box
The twin auger utilizes two - 10" high speed cross augers equipped with hold-downs and wipers. The auger housings are poly-lined to reduce buildup.

Eliminate Spillage

H&S Manufacturing HD Twin Auger Forage Box
The twin augers extend 11" beyond the side of the head. A built-in auger extension is standard and eliminates spillage between box and blower.

Steel-Welded Subframe

H&S Manufacturing HD Twin Auger Forage Box
H&S boxes have an all steel-welded subframe.

Transport Lights Standard

H&S Manufacturing HD Twin Auger Forage Box
Transport lights are standard on all H&S boxes. This is the light configuration on the front unload boxes.

Optional Front Hydraulic Drive

H&S Manufacturing HD Twin Auger Forage Box
All front unload boxes have a standard PTO drive while unloading off the front. Front hydraulic drive is optional.
HD Twin Auger Forage Box Specifications
ModelFBTA16FBTA18
Capacity with Roof
831FT-3
982FT-3
Inside Width
7' 4"
7' 4"
Inside Height
93"
97"
Overall Length
19' 3"
21' 3"
Overall Width
107"
107"
Overall Height (bolster to roof)
114"
118"
Weight 
4300#
4700#
T-Rod Main Apron Chain 4-16,000# tensile-65,000# combined tensile
4-10,000# tensile-40,000# combined tensile
Main Apron Chain
667H Pintle-10,000# x 4 (standard)
Cross Feed
2-10" side by side augers
equipped with adjustable hold-downs
22" wide, left hand only
Unloading Beaters
3 18" 4-bar spiral, even feed
Main Apron Drive
Variable speed drive
Unload rate from 9"/min to 12' 6"/min
Drive Sequence
H&S bronze worm gear box
80# roller chain
1 3/4" stress proof main apron drive shaft
Power Source
540 hp PTO or hydraulic drive
Emergency Stop Clutch
Standard
Transport Lights/Hold Down Kit
Standard