The CMF-590 has a 590 cu. ft. mixing capacity with a tare weight of 12,000 lbs.
Call for Pricing and Finance Options
The CMF-590 has a 590 Cu. Ft. mixing capacity with the standard extension.
The unloading door is 42" high and can be on the left or right side of the machine. Conveyor options are a 3' or 5' extension which gives a feeding height range of between 40" and 62".
Magnets on the discharge chutes remove metal, such as bale wire, from feed.
CV PTO with optional 2-Speed Gear Box
The CMF-590 comes equipped with a Heavy Duty Constant Velocity 1000 rpm PTO with an optional 2-Speed Gear Box. The 2-Speed Gear Box is used for loaded start-ups and heavy rations.
4-point scale for accurate weighing, with reduced scale bounce during loading and feeding.
Rigid Heavy Duty Axles on each side with 2 385/65R 22.5 tires.
Free motion clutches on the driveline protect the heavy-duty gear boxes. Gear boxes come with a 2 year warranty.
Auger with Knives
104" heavy-duty single auger with up to 7 self-sharpening serrated knives driven by a HD USA gear box.
Ladder mounted on front of machine which allows for viewing of mixed ration while machine is stopped.
Adjustable Vertical Knives
Adjustable vertical knives for more aggressive cutting.
The Tapered Boil Ring is standard equipment on the CMF-590. It prevents product from boiling over the sides during the cutting and mixing process.
|CMF-590 Vertical Mixer Specifications|
|Mixing Capacity w/ 12" Extension
||590 cu ft
|Gross Weight Capacity
|Tare Weight - TMR
|Number/Thickness of Knives
||7-5/16" self sharpening
||24" x 42"
||Left or Right
|DRIVE LINE & GEAR BOXES|
|1-3/4" constant velocity 1000 rpm PTO shaft|
1-3/8" constant velocity 1000 rpm PTO shaft
|Protection: Free motion automatic clutches (1)
||(1) HD Gear Box with 2 year warranty
|Digi-Star 4 point scale with optional monitor
|TRANSPORT DIMENSIONS (Fully raised conveyor)|
||10' 11" to 14' 3", depending on conveyor
|Loading Height w/ Ext
||Clevis type Hitch/Pintle
||2) 385/65R 22.5
||2) 8 bolt
|REQUIREMENTS FOR OPERATION - TRACTOR|
|PTO Horsepower Required
||540 rpm, 1-3/8" or 1-3/4" dia w/ 6 spline
|Min. Tractor Hydraulic Output
||8 gpm at 1500 psi
|SMV Signs & Road Lights
||12 VDC (Battery included)
- Magnets on Chutes/Spouts - Discharge magnets on the chutes/spouts remove ferrous metal, such as bale wire, from feed.
- Left or Right Door Opening - Optional left or right door opening with discharge conveyor options of 3’ or 5’ provide the ultimate flexibility for feeding applications. The 3’ conveyor has a feed height ranging from 40” to 48”. The 5’ conveyor has a feed range from 49” to 62”.
- 2 Speed Gear Box - The 2 speed gear box is used for heavy starts after transporting heavy rations to protect the tractor PTO and mixers drive train.
- Digi-Star Scale & Feed Management Programs